Home » » Boise Phone - Equipment and Repair Tools (Part 1)

Boise Phone - Equipment and Repair Tools (Part 1)

Written By soen on Monday, June 21, 2010 | 6/21/2010

Link2Mobile. Boise Mobile Course tips: Basically to be a phone technician, the mobile equipment and tools needed are not too expensive. After that I learned about the technique of opening the cover (casing) phone, next I can see that on some phones have the form of screw (nut) specifically so requires special opener screwdriver mobile phone type, that is often called T6, T5, T4 and screwdriver flowers.

Even with only one set of devices is just a screwdriver, I was able to repair minor damage that often occurs on the phone that often due to the (bad connect) the damage caused by an imperfect connection between the connectors with each other.

7 Pcs Repair Deluxe Open Tool Kit with Magnetic Tip Mini Screwdrivers for iPod iPhone Cell Phone PDA
7 Pcs Repair Tool Kit


Minor defects - bad connect could be improved, such as:
  1. There is no audible sound due to 'the speakers' bad connect 
  2. No sound sent resulting from 'mic' bad connect 
  3. There is no vibration of the phone caused 'vibrators' bad connect 
  4. No ring tones on mobile phones because bad connect on the 'buzzer' component. 
  5. Can not or hard to press the keypad keys caused by dirty or rust 
  6. It could also fix a dead phone with wet drying all total components 
Of course I have to know beforehand about the components of mobile phones causes damage to either the heavy or light that I have discussed above.

Hardware equipment and supplies needed by the phone technicians, among others, namely:

Screwdriver set
Screwdriver set an authorized capital of a technician, at a screwdriver sets are usually used type T6, T5, T4, and a screwdriver to open the screw flowers (nuts / bolts) on various brands of mobile phones. Select which edged steel screwdriver sets that are not easily worn out or damaged when used and also to prevent damage to the screw (nuts / bolts) itself.

Tweezers
Tweezers used to hold the component during removal and installation of mobile phone components on both internal or external components on the PCB or PCBs. Sometimes also used to poke or push up the phone casing, but this is not recommended because it will damage the eye tip tweezers (curved / broken) and can also cause scratches on the phone casing.

The tweezers divided into two, straight tweezers and bent tweezers. Although the same function but for curved tweezers are usually used for removal of loose parts that are difficult because they have a good claw power than straight tweezers.

(to be continue..)
Share this article :

Post a Comment

 
Support : Creating Website | Johny Template | Mas Template
Copyright © 2013. Link 2 Mobile - All Rights Reserved
Template Created by Creating Website Published by Mas Template
Proudly powered by Blogger